How to import decorative lighting from China
Most first orders go wrong before production starts — in the assumptions. This is the checklist we wish every new buyer arrived with, written from the factory side of the table.
1. Decide the product, not the price
Decorative lighting is a category where the photograph sells the product and the specification decides whether it survives the journey. Before you ask for a price, fix four things: the exact model, the colour or finish, the packing format (gift box, plain box, mailer) and the destination market. A quote without those four items is only an estimate, and estimates are what cause disputes later.
If you are still choosing, order the catalogue by how the product behaves in transit. Glass and liquid products — sand art lamps, glass shade lamps — need foam inserts and heavier cartons. ABS and iron products travel lighter and cheaper. That single decision often changes your landed cost by more than the unit price difference between two similar-looking models.
2. Ask for carton data before you ask for a discount
Freight is usually the second-largest line in a lighting import after the goods themselves, and it is the line buyers negotiate least because the data is hard to get. Ask for four figures per model: pieces per carton, carton dimensions, net weight and gross weight. With those you can calculate volumetric weight and compare sea, air and express properly.
On this site every product page carries those figures alongside the unit price, because a buyer who cannot calculate landed cost cannot decide whether the product is viable. If a supplier will not give you carton dimensions before an order, treat that as information in itself.
3. Samples: pay for them, but pay for the right ones
A sample order is not a formality, it is the cheapest risk-reduction available. Order two or three models rather than ten: one glass product, one ABS product, one with a battery. Check the finish under daylight, the weight in hand, the switch feel, and whether the light output matches the photographs.
Expect to pay for samples and courier. A factory that sends free samples usually recovers the cost somewhere — often in a higher unit price on the bulk order. Ask instead for the sample cost to be credited against the bulk order, which is a normal and fair arrangement.
4. Certification: match the document to the market
CE and RoHS are the baseline for the EU; FCC for the US. What matters is not the logo on the box but whether the test report actually names the model you are buying. Ask for the report number and the model list. If a supplier says 'all our products are CE' without a document that lists your model, you do not have certification, you have a claim.
Battery products add a second layer: transport rules for lithium cells, and market-specific rules for rechargeable devices. Tell the factory the destination market at the quotation stage, not at the packing stage.
5. Payment terms and the deposit
Thirty percent deposit with the order and seventy percent before shipment is the standard structure for Chinese lighting factories, including ours. The deposit covers materials; the balance is released against inspection photos or a third-party inspection before the container leaves.
Be careful with suppliers who ask for the full amount up front on a first order, and equally careful with buyers who expect zero deposit. Both positions usually signal a relationship that will end badly. A proforma invoice should state the deposit, the balance, the Incoterm, the lead time and the packing specification in one page.
6. Inspection and the last ten percent
Ask for photos of the finished goods in cartons, then of the loaded container. If the order is large enough to justify it, book a third-party inspection — the cost is small against the cost of a container of lamps that arrive with the wrong plug or a scratched finish.
The last ten percent of the work is where most disputes live: carton marks, barcodes, manual language, plug type, spare parts. Put all of it in writing on the proforma invoice, with photographs if necessary. A factory will follow a specification it has agreed to; it cannot guess one.
What this means for a first order
Start with one carton per model across two or three models, from a supplier whose carton data you already have. Pay for samples. Confirm the certificate names your model. Agree packing in writing. Then scale the models that sold, and ask for a colour or logo change on the second order rather than the first — customisation is cheaper and faster once the relationship has a baseline.
That sequence costs a few weeks and a few hundred dollars, and it removes most of the ways a first import goes wrong.
Sourcing this range? Send the models and quantities and we will quote with carton data and lead time.
Start an inquiry